Javascript required
Skip to content Skip to sidebar Skip to footer
Home / what steps to make a bottle cap mural on a wall

what steps to make a bottle cap mural on a wall

Download Article

Download Article

Bottle caps from beer bottles and soda bottles brand great earrings and magnets. If you lot have a lot of bottle caps, nonetheless, yous tin turn them into a stunning slice of sheet artwork. If you prefer to create something that you lot tin utilize, then y'all can use a wooden tray as your canvas instead.

  1. 1

    Choose your canvas. You lot can utilize a regular thin sail, or a thick wrapped canvass. A plank of forest from the craft store will also work. Alternatively, you lot can utilise a thin piece of cardboard instead for a quick and inexpensive project.[1]

  2. 2

    Paint your desired canvas, then let the pigment dry. Yous can do this with spray paint or acrylic arts and crafts paint. Employ a single coat of paint and then let it dry (about xv to xxx minutes). If the paint is too thin and you can see your sail through information technology, apply a 2d coat, and allow that one dry too.[2]

    • Apply spray paint using a sweeping, side-to-side motion from 8 to 10 inches (twenty to 25 cm) away.
    • Apply acrylic craft paint with a wide, flat paintbrush. Work your manner from one side to the other using long strokes.

    Advertizing

  3. 3

    Sketch out a uncomplicated design with a pencil. Cull a elementary silhouette, such as a heart, star, fish, or pine tree. Trace this silhouette onto your sheet with a pencil. Try to encompass as much of the sail as you lot can, leaving a one to three in (two.5 to 7.six cm) border around your silhouette.[3]

    • For a more complex artwork, try the outline of your state or country. Yous can as well do your country's flag instead.
    • If yous can't see the pencil lines, use a piece of white chalk instead.
    • Other examples if simple silhouettes include crabs, seahorses, whales, and anchors.

  4. four

    Pound the metal bottle caps flat with a hammer, if desired. While not admittedly required, this will arrive easier to glue the bottle caps to your canvass. Cull canteen caps that match your design, such as red for a heart or greenish for a tree. Pound them apartment against a wooden block with a hammer or mallet with the blueprint side facing down. Make sure that yous pound the edges outward.[4]

    • If you are doing your country'south flag, use colors that match the flag. For instance, if the flag has carmine and white in information technology, choose bottle caps that are red, and bottles caps that are white.

  5. v

    Arrange the bottle caps on the sail to fill up your silhouette. Make sure that the design role of the canteen caps is facing upwards. Place the canteen caps close enough so that they are touching. You may accept to overlap some and off-fix others in order to fill up all the nooks and crannies of your design.[5]

    • Use pliers to bend flattened canteen caps into flat edges and then that you lot tin fit them into angles and corners.
    • If you are making a fish design, consider overlapping the bottle caps like scales for a neat touch.

  6. 6

    Glue the bottle caps to the sheet. Pick up a bottle cap from the top-left corner of your design. Coat the inside with hot glue or industrial-strength mucilage, so press information technology back onto the canvas. Work your way in rows from 1 side of the canvas to the other.[vi]

    • If yous did not pound the bottle caps flat, outline the inside rim of the bottle caps with hot mucilage before pressing them down. Work 1 bottle cap at a fourth dimension.

  7. vii

    Fill the background with more bottle caps, if desired. You tin can exit your sheet the way it is, with a blank, painted groundwork. If you want your canvass to be completely covered with bottle caps, so simply fill up it in with more caps using the same technique. Choose a color that contrasts with your design; this will help information technology stand out more.

  8. eight

    Let the mucilage dry out before displaying your piece. Hot glue sets upwards within seconds, simply most industrial strength glues require much longer to dry. Some are ready to use within hours, while others demand 1 to two days to dry and cure. Check the label on the tube to find out how long your mucilage needs to dry out and cure.

    Advertisement

  1. 1

    Choose a manifestly, wooden serving tray that you wish to decorate. The tray tin can be already painted, or it can be unpainted. You lot tin also employ this method on tables, as long as they have a rim or lip of some sort.[seven]

    • Arts and crafts stores typically carry unpainted forest trays in their wood crafting section.

  2. two

    Paint your tray with acrylic craft pigment, if desired. Apply a single coat of paint using a wide paintbrush made from constructed, taklon bristles. Let the paint dry, and so add a 2nd coat if the starting time one is too thin. Let the second glaze of pigment dry out completely before moving on. This should only have 15 to 20 minutes.[8]

    • You don't have to paint the bottom if you will exist using grout effectually the bottle caps. You should pigment the bottom if you'll be using clear epoxy resin, even so.
    • Exercise non use spray paint. Information technology may be faster to employ, but it will be harder to impact up in the stop.

  3. 3

    Arrange the bottle caps the way yous want them on the tray. Place the canteen caps as close together or as far autonomously equally you want. Adjust them in a grid-like pattern, or stagger them similar bricks on a wall. If you want to create a specific design, such every bit a heart, use ane color of canteen caps for the design, and a second colour for the background.[9]

  4. 4

    Glue the canteen caps downward using liquid nails. Pick up the starting time bottle cap, and place a large drop of liquid nails onto the tray. Press the bottle cap into the gum, so move onto the next cap. Piece of work your way dorsum and forth across the tray in rows.

    • Liquid nails is a type of glue. It is very thick and potent. You lot can too apply an industrial strength glue, such every bit E6000. Hot glue may also work.[10]

  5. 5

    Look for the gum to dry and cure. Hot glue sets inside minutes, but liquid nails and other types of industrial-strength glue typically need at least a mean solar day to dry and cure. Read the label on the tube or can to notice out the complete drying and curing instructions.[11]

  6. 6

    Mask off the sides of the tray with painter's tape. Yous will need to encompass the peak and inside walls of the tray with painter's tape. You can too comprehend the exterior if you really want to. When you are calculation the tape to the inside walls, make sure that you place it just above the tops of the bottle caps.[12]

    • Skip this step if you will be using clear epoxy resin instead of grout.

  7. vii

    Mix your grout. Purchase a tub of grout from the craft shop, and set information technology according to the instructions on the package. Grout from the arts and crafts store is finer than grout sold in hardware stores. Information technology comes in different colors, has a finer texture, and is typically easier to mix.[13]

    • If y'all prefer to use clear epoxy resin, purchase a kit from the arts and crafts store, then mix information technology co-ordinate to the instructions in the bundle. Typically, yous mix parts A and B together.[14]

  8. viii

    Spread the grout across the bottle caps. You can exercise this with a grout bladder or with a sponge. Scoop the grout onto the tray, then spread it across the entire lesser. Make certain that you get the grout into all of the cracks and crevices betwixt the canteen caps.[15]

    • Use enough grout to reach the tops of the bottle caps. Do not bury the bottle caps nether the grout.
    • If you lot are using clear epoxy resin, slowly pour the resin into the spaces between the bottle caps. Proceed pouring the resin until it covers the caps with a sparse layer.[16]

  9. 9

    Wipe the grout from the tops of the canteen caps with a damp sponge. Go a clean sponge, and soak it in h2o. Wring the excess water from the sponge, and so wipe information technology across the bottom of the tray. Repeat this stride, along with cleaning the sponge, as often every bit it is necessary in guild to become all of the grout off of the bottle caps.[17]

    • Skip this step if you are using clear epoxy resin. Practice not touch the resin.[18]

  10. 10

    Peel off the painter's record, then let the tray dry. Clean your easily of any grout first, then dry them off. Carefully peel the record away from the sides of the tray. Move the tray to a place where it won't get accidentally bumped, and leave information technology there until the grout dries.[nineteen]

    • How long the grout takes to dry depends on the blazon and make that you used. Read the label. Some types of grout likewise requires a curing fourth dimension.
    • Epoxy resin needs 24 to 48 hours to dry and cure. Read the instructions to find out the exact curing time. Do not utilize it before it finishes curing, or it will go tacky.[20]

  11. xi

    Touch the tray upwardly, if needed. If you lot observe any grout on the painted part of the tray, paint over it using some acrylic craft paint.[21] If you used clear epoxy resin, then your tray is ready to employ!

    Advertisement

Add New Question

  • Question

    What can I brand with bottle caps?

    Claire Donovan-Blackwood

    Claire Donovan-Blackwood is the owner of Center Handmade UK, a site defended to living a happy, creative life. She is a 12 year blogging veteran who loves making crafting and DIY as easy equally possible for others, with a focus on mindfulness in making.

    Claire Donovan-Blackwood

    Arts & Crafts Specialist

    Expert Answer

    Support wikiHow by unlocking this skilful answer.

    Use your bottle caps to make hanging decorations that you can put upwardly around your home. Gather two bottle caps, some paint, hot glue, colored glitter, and some string. Paint the bottle caps then let them dry completely. Cover the ridged edges of one bottle cap with hot glue. Then place the other bottle cap on top of the glued cap, as if you lot were making a sandwich with them. Wait for the mucilage to dry. Brand dots, lines, or other designs around the bottle caps using the hot gum. Sprinkle some glitter over them before the gum dries. Add one terminal drib off hot gum to the edge of the cap. Bend a length of string in half to make a loop and put the ends into the hot gum. Once the glue dries, you tin hang your decoration anywhere yous'd like!

Inquire a Question

200 characters left

Include your email address to get a bulletin when this question is answered.

Submit

Advertisement

  • Ask friends, family, and bartenders for canteen caps.[22]

  • If yous don't like the beer or soda logos on the bottle caps, spray paint them a different color.

  • How many canteen caps you need depends on how big your canvas or tray is. Plan on using 1 bottle cap per square inch (2.5 cm).

  • You lot tin apply these techniques to decorate other items, such equally kitchen backsplashes and bath mirrors.

Advertisement

Things You'll Demand

  • Canvas
  • Acrylic arts and crafts paint or spray pigment
  • Wide, flat paintbrushes (for acrylic paint)
  • Metal bottle caps
  • Hammer
  • Hot glue or industrial force mucilage
  • Wooden tray
  • Acrylic craft paint
  • Wide, flat paintbrushes
  • Painter'due south tape
  • Grout or clear epoxy resin
  • Grout float (if using grout)
  • Sponge (if using grout)
  • Metal bottle caps
  • Liquid nails, hot glue, or industrial strength glue

About This Commodity

Thanks to all authors for creating a page that has been read 99,111 times.

Did this commodity help y'all?

mcilwraiththrooked.blogspot.com

Source: https://www.wikihow.com/Make-Bottle-Cap-Art